PRODUCTS » Reaction Response Box V1.0
immo-RRB Reaction Response Box
Have you always made this type of measurement with a simple keyboard, but you are dissatisfied with accuracy and latency time? With RRB you can improve the performance and accuracy of your experiments.
The RRB doesn't need dedicated drivers, it is just a plug&play device!

You can connect the RRB directly to your pc with the provided USB cable, no extra hardware is required (i.e. USB to serial converter, which can introduce latency time and make your measure inaccurate).
It only takes five minutes to setup the RRB to suit your needs.
You can then simply connect your preferred input button to one of the two 3.5mm audio jack inputs and start measuring.
Simple PC software
With our user-friendly software interface you can easily configure the label response character to any key (default L and R), so you don't need any special modifications in your test programs.
You can also choose from three types of response: on press, on release or continuous.
To avoid to distract your patient, you can also simply configure the status LED to be turned off during the normal operation.
Ultra low-latency keyboard replacement
If your test software can be used with a standard keyboard, then they will also work with the immo-RRB.
For each input you can choose the corresponding character to be sent to your pc.
The response type can also be configured to one of the following options:
  • on press: the character is sent when the button is pressed
  • on release: the character is sent when the button is pressed and released
  • on continuous: the character is continuously sent as long as the button is pressed
A big thank you for the collaboration to:
© immo electronics | All products are for Research Use Only. Any medical use is forbidden.